Skip to content

Appliance electricity cost calculator

Enter wattage and daily run-hours for any appliance to see exact cost per day and per month at the current Bangladesh tariff. Covers single appliances and full-home loads.

Calculator

Default ৳9.10 = LT-A residential 201–300 unit slab

Cost / hour

৳ 12.74

Cost / day

৳ 101.92

Cost / month

৳ 3057.60

Roughly 11.20 units/day · 336.0 units/month

How it works

Watts, hours, and the real cost of every appliance

Wattage × hours ÷ 1000 = units (kWh). Multiply by your tariff to get the taka. Here's why the printed wattage isn't always what you pay for.

1,400 W150 W75 WMONTHLY COST৳ 2,549

The essentials

  • Rated wattage on the sticker is the maximum — most appliances average lower in real use
  • Bangladesh tariff is slab-based, so adding one appliance can push your whole bill into a higher slab
  • AC, fridge, and water heater account for 70%+ of most residential bills

The math

How cost is calculated

Every appliance pulls a certain wattage when on. That wattage, multiplied by the hours you use it, gives the energy it consumes in watt-hours. Divide by 1000 and you have kilowatt-hours(kWh) — what your meter measures and your bill calls “units.”

A 1,400 W inverter AC running 8 hours a day uses 1400 × 8 ÷ 1000 = 11.2 units per day, or 336 units per month. At ৳9.10/unit that’s ৳3,058 a month — from a single appliance.

Important nuance

Rated wattage vs running wattage

The wattage printed on the appliance is its rated wattage — what it draws at maximum load. An inverter AC labelled 2,200 W can spend most of its run-time at 700–1,100 W once the room has cooled. Refrigerators behave similarly: a 150 W average is realistic even though the compressor briefly hits 400+ W on every cycle.

Reference table

Typical wattages in a Bangladesh home

ApplianceWattageDaily hoursUnits/month
LED bulb 9W9 W6 h~1.6
Ceiling fan75 W10 h~22.5
32" LED TV50 W5 h~7.5
Refrigerator (14 cu.ft)150 W avg24 h~108
1.5-ton inverter AC1,400 W8 h~336
Electric geyser2,000 W1 h~60
Water pump (1 HP)746 W1 h~22.4
Iron1,000 W0.5 h~15

When this calculator matters

Real-world use cases

1

Buying a new AC

A 1.5-ton inverter at 1,200 W average vs an old non-inverter at 1,800 W: ৳570/month for a Dhaka apartment with 8 hours daily use. Over 10 years that’s ৳68,400 — often more than the price gap between units.
2

Diagnosing a bill jump

If your bill rose ৳3,000 and you suspect the AC, plug actual wattage + hours and check whether the math adds up. Half the time it does, half the time it’s something else.
3

Geyser vs gas

A 2,000 W electric geyser for 1 h/day = 60 units/month = ~৳546. Compare against piped gas or LPG cylinder cost.

Frequently asked questions

Bangladesh tariff uses slabs — the rate per unit increases with monthly consumption. This calculator uses a single rate. Use the main bill calculator for slab-aware figures.

Other calculators

Compare electricity worldwide

What would the same electricity use cost elsewhere? Enter your monthly kWh and compare household benchmarks across 12 countries, with Bangladesh selected to get you started.

Solar savings calculator

Estimate how much you save per month with a rooftop solar installation under the net-metering policy, including payback period and 25-year return.

Watt → unit converter

Quickly convert watts × hours of use into electricity units (kWh) per day or month, then into Taka at the rate that applies to your meter.

kWh ↔ unit

1 unit = 1 kWh = 1,000 watt-hours. They are the same quantity under two names, so there is nothing to convert — here is the arithmetic, what it costs in taka, and why watts are a different measure entirely.

Load shedding cost

Compare what an hour of load shedding actually costs when you switch to a diesel or petrol generator, versus what the same units would have cost on the grid.

Prepaid vs postpaid savings

Enter your monthly energy charge to see what the prepaid rebate actually saves you over a year and a decade, and weigh the indirect pros and cons against a postpaid meter.

Bill → units (reverse)

Know the amount but not the units? Enter what you were charged — a single figure, or the peak and off-peak split — pick your meter category, and see how many units that buys and the real price per unit.

New connection cost

Pick your category, phase and sanctioned load to get an itemised estimate of what a new connection costs upfront — deposit, application fee and meter charge — plus the recurring meter rent.

Prepaid recharge calculator

Enter what you recharge and your load to see how much reaches the meter as energy, and why the first recharge of the month always buys less.

Related guides & services